Contact us Login VIEW DEMO FREE TRIAL

GoTrip

GoTrip

More from GoTrip

Click on the model image to see detailed information and current list of supported features

Looking for other GoTrip model? Suggest us to integrate it.

Server connection details

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47755
Integrated on05/02/2015
Revised on05/02/2015
General information
PurposeVehicle
InstallationProfessional
Housing
Weight96 g (3.39 oz.)
Size90x52x15 mm (3.54x2.05x0.59 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs1
Number of inputs (all types)3
ACC/Ignition input
Feature already supported
Discrete inputs
Feature already supported
Outputs
Feature already supported
Hardware features
Battery capacity450 mAh
Built-in battery
Emergency button
Feature already supported
Engine block relay
Feature already supported
Hardware extras
Voice listening
Feature can be supported upon request
Emergency button
Feature already supported
Tracking features
Tracking modesContinuous
Location by Cell ID
Feature already supported
Events monitoring
Battery low
Feature already supported
External power cut off
Feature already supported
Self monitoring
Network signal level
Feature already supported
GNSS signal level
Feature already supported
External power source voltage
Feature already supported
Remote management
Server connection setup over SMS
Feature already supported
Remote device configurationYes (over SMS)
Feature already supported
Remote outputs controlYes (over GPRS)
Feature already supported
Certification
CE
FCC

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:

  • #apn#123456#apn#apnUser#apnPassword#
  • #IP#123456#217.23.132.215#47755#
  • #at#30#sum#0#

<APN_Name> – your local GSM-provider APN

<User>,<Password> – your local GSM-provider user and password for APN

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in

Login

[clean-login]

CLOSE
Register

[clean-login-register]

CLOSE
Loading...