FORT-112EG
FORT-112EG provides GPS coordinates and heading direction of the vehicle, transmit information about the vehicle in case of road accident (or any kind of accident) and provides two-way communication with the emergency services. The device can also provide additional services, such as remote control, security, and management of the vehicle.
Show more
FORT-112EG is fully compatible with the requirements of “ERA-GLONASS” system and is used as factory installed equipment by some car manufacturers.
Location and tracking
- GPS and GLONASS support
- Continuous and interval tracking modes
- LBS support
Mobile networks
- GSM 900/1800МГц
- UMTS 900/2100 МГц
- 3G support
Power supply
- 550 mAh in-build battery
- Power voltage 8-40 V
Inputs and outputs
- 4 general-purpose digital inputs with impulse count feature
- 1 ignition input
- 1 input with working voltage range 0-15V
- 1 input with working voltage range 0-30V
- 3 general-purpose outputs
- 1 LED control output
- CAN bus data
- 1-Wire
Other features
- Automatic crash detection
- Emergency call in automatic and manual modes
- Transmit the minimum required information to the emergency center
- Support EGTS protocol
- Optional camera with infrared light
- 32 GB SD-card
- In-build bus stop announcer for use in public transport
- Up to 8 fuel sensors
- RFID support
Server connection
| EU platform | tracker.navixy.com (52.57.1.136) |
| US platform | tracker.us.navixy.com (13.52.37.2) |
| Server port | 47730 |
| Auto registration | Yes |
General information
| Purpose | Vehicle |
| Weight | 300 g (10.58 oz.) |
Connectivity information
| Network signal level | Yes |
| Network operator ID | Yes |
Location information
| GNSS signal level | Yes |
| LBS | Yes |
Features
| Remote outputs control | Yes |
| Odometer | Yes |
| Hardware key | Yes |
Interfaces
| Discrete inputs | 5 |
| Number of outputs | 3 |
| Analog sensor | Yes |
Input Fields
State Fields
Events monitoring
Activate a device on the platform Try it now
Haven’t found your device? We can add it Integrate