Contact us Login LIVE DEMO FREE TRIAL

fifotrack

fifotrack

More from fifotrack

Click on the model image to see detailed information and current list of supported features

Looking for other fifotrack model? Suggest us to integrate it.

Server connection details

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port46993
General information
PurposeVehicle
InstallationProfessional
Housing
Weight160 g (5.64 oz.)
Size90x60x27 mm (3.54x2.36x1.06 in)
GNSS Location
External antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
External antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs2
Number of inputs (all types)4
ACC/Ignition input
Feature already supported
Discrete inputs
Feature already supported
Analog inputs
Feature already supported
Outputs
Feature already supported
Hardware features
Battery capacity600 mAh
Built-in battery
Emergency button
Feature already supported
Hardware extras
Voice listeningOptional
Tracking features
Tracking modesContinuous
Odometer
Feature already supported
ECO driving
Feature already supported
Events monitoring
Battery low
Feature already supported
External power cut off
Feature already supported
Antenna cut off
Feature already supported
Self monitoring
GNSS signal level
Feature already supported
GNSS satellites fixed
Feature already supported
External power source voltage
Feature already supported
Internal battery level
Feature already supported
Remote management
Server connection setup over SMS
Feature already supported
Remote device configurationYes (over GPRS)
Feature already supported
Firmware update OTA
Forced GNSS location update over SMS
Feature can be supported upon request
Certification
CE
FCC

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

000000,B00,217.23.132.215,46993
000000,B01,<apn>,<apnUser>,<apnPass>

The <APN> parameters depend on your GSM carrier.

More about fifotrack in our blog

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in

Login

[clean-login]

CLOSE
Register

[clean-login-register]

CLOSE
Loading...