Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

• Do not set any password, keep it clear (as by default)
• Do not set any master number prior to the device activation
• Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:

• APN,666666,<apn>,<apn login>,<apn password>#
• SERVER,666666,0,217.23.132.215,47755,0#

<APN_Name> – your local GSM-provider APN

<login>,<Password> – your local GSM-provider user and password for APN