Blip Personal - Supported GPS Trackers - Navixy
Contact us Login LIVE DEMO FREE TRIAL

Blip Personal

Coban 102B is a handheld GPS tracker with a limited set of functions. It is suitable for personal use of lone workers or senior family members.

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47735
Integrated on03/12/2013
Revised on18/03/2015
General information
PurposePersonal
InstallationNot required
Housing
Weight50 g (1.76 oz.)
Size64x46x17 mm (2.52x1.81x0.67 in)
GNSS Location
Internal antenna (GNSS)Yes
GPSYes
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)Yes
Cellular network generation2G
Hardware features
Battery capacity800 mAh
Built-in batteryYes
Emergency buttonYes
On request
Tracking features
Tracking modesContinuous
Events monitoring
Battery lowYes
Supported
Fall/ShakeYes
Supported
Remote management
Server connection setup over SMSYes
Supported
Remote device configurationYes (over SMS)
Supported
Certification
CEYes
FCCYes

How to connect to Navixy server

Blip Personal is tightly integrated with this software platform.

Activation process

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

When you activate a device, the following SMS commands are sent from server to device:

SMS command from
Server to Device
SMS reply from
Device to Server
Command
explanation
ITV123456 30OK!Time period settings
 apn123456 <apn_name> <apnUser> <apnPass> APN ok Set up APN name
timezone123456 0OKTime zone settings
 adminip123456 217.23.132.215 47735 adminip ok!Set up server address and port

Some parameters will depend on your cellular network operator:

  • <apn_name> – APN name
  • <apn_login> – APN login
  • <apn_pass> – APN password

As soon as these commands are executed the GPS tracker will connect to the server, and the rest of configuration process will be done via GPRS channel.

Important notice:

  • Do not set any password on the device (by default: “123456”)
  • Do not set any master number prior to the device activation
  • Do not set the Time zone, it must be UTC+0h as per default
  • Do not set any pin-code to your SIM card

If you experience problems with automatic device activation, you can send the commands manually, and your device will become activated on the platform.

Activate a device on the platform Try it now

Haven’t found your device? We can add it Integrate

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 317 1622

Log in

Loading...

We use сookies to improve our website, products and related services, analyze site traffic, and serve targeted advertisements. If you continue to use our services, you consent to our use of сookies. Read more