Contact us Login LIVE DEMO FREE TRIAL

Auto Leaders AL-900E

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47724
Integrated on19/03/2015
Revised on19/03/2015
General information
PurposeVehicle
InstallationProfessional
Housing
Weight190 g (6.7 oz.)
Size111x68x24, Lx80x80 mm (4.37x2.68x0.94x3.15x3.15 in)
Waterproof classIP5X
GNSS Location
External antenna (GNSS)Yes
GPSYes
Connectivity
Cellular network typeGSM Quad Band
External antenna (Connection)Yes
Cellular network generation2G
Interfaces
Number of outputs2
Number of inputs (all types)4
ACC/Ignition inputYes
Supported
Discrete inputsYes
Supported
Analog inputsYes
Supported
OutputsYes
Supported
Hardware features
Battery capacity750 mAh
Built-in batteryYes
Emergency buttonYes
Supported
Hardware extras
Emergency buttonYes
Supported
Driver ID readingYes
On request
Tracking features
Tracking modesContinuous
Events monitoring
Battery lowYes
Supported
Device switched on/offYes
Supported
Self monitoring
Network signal levelYes
Supported
GNSS signal levelYes
Supported
Remote management
Server connection setup over SMSYes
Supported
Remote device configurationYes (over GPRS)
Supported
Forced GNSS location update over SMSYes
On request
Certification
CEYes
FCCYes
EACYes

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:

  • A000000,011,APN,<APN_name>,<User>,<Password> (APN settings)
  • A000000,012,217.23.132.215:47724 (TCP server address)
  • A000000,010,2 (Allow GPRS-connection)
  • A000000,008,0 (UTC-setup)

<APN_Name> – your local GSM-provider APN

<User>,<Password> – your local GSM-provider user and password for APN

Activate a device on the platform Try it now

Haven’t found your device? We can add it Integrate

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 317 1622

Log in

Loading...

We use сookies to improve our website, products and related services, analyze site traffic, and serve targeted advertisements. If you continue to use our services, you consent to our use of сookies. Read more