Contact us Login LIVE DEMO FREE TRIAL

Atrack AL11

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47712
General information
PurposeVehicle
InstallationDIY
Housing
Weight198 g (6.98 oz.)
Size105x72x21 mm (4.13x2.83x0.83 in)
GNSS Location
Internal antenna (GNSS)Yes
GPSYes
Connectivity
Cellular network typeGSM 850/1900, 1900/1700/850/700
Internal antenna (Connection)Yes
Cellular network generation2G, 3G, 4G
Interfaces
Number of outputs2
Number of inputs (all types)4
ACC/Ignition inputYes
Supported
Discrete inputsYes
Hardware extras
Driver ID readingYes
Supported
External temperature sensor readingYes
On request
Tracking features
Tracking modesContinuous, Interval
Location by Cell IDYes
Supported
OdometerYes
Supported
ECO drivingYes
Supported
Events monitoring
Battery lowYes
Supported
External power cut offYes
Supported
TowingYes
Supported
Self monitoring
Network signal levelYes
Supported
GNSS signal levelYes
Supported
External power source voltageYes
Supported
Internal battery levelYes
Supported
Remote management
Server connection setup over SMSYes
Supported
Remote device configurationYes (over GPRS)
Supported
Remote outputs controlYes
Forced GNSS location update over SMSYes
On request

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

AT$GPRS+929=1,”{apn}”,”{apn_user}”,”{apn_pass}”,217.23.132.215,47712,0,1,10,0,1

The <APN> parameters depend on your GSM carrier.

Activate a device on the platform Try it now

Haven’t found your device? We can add it Integrate

More about ATrack in our blog

  • Integrated devices October-November 2016

    We have prepared a list of devices integrated in the past two months. At this time, the digest consists of chinese and taiwanese manufacturers that need your attention.…

  • ATrack and Navixy form partnership for integrated Fleet Management Systems

    ATrack Technology Inc., a world-class designer and manufacturer of GPS telematics devices, is pleased to announce the new partnership with Navixy, a GPS tracking and M2M software provider, to deliver a range of reliable and robust hardware to the connected car industry while our customers’ overall fleet management solution. ATrack will work together closely with…

  • ATrack GPS trackers and Navixy are 100% interfaced

    A few last months are full of the new integration in Navixy. We are happy to announce that our platform supports very popular ATrack GPS devices. All the product range of the Taiwanese manufacturer works with the maximum performance of Navixy.…

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 317 1622

Log in

Loading...

We use сookies to improve our website, products and related services, analyze site traffic, and serve targeted advertisements. If you continue to use our services, you consent to our use of сookies. Read more