Contact us Login LIVE DEMO FREE TRIAL

Atlanta

Atlanta

More from Atlanta

Click on the model image to see detailed information and current list of supported features

Looking for other Atlanta model? Suggest us to integrate it.

Server connection details

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port46990
General information
PurposeVehicle
InstallationProfessional
Housing
Weight80 g (2.82 oz.)
Size99x54x16 mm (3.9x2.13x0.63 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs1
Number of inputs (all types)5
ACC/Ignition input
Feature already supported
Discrete inputs
Feature already supported
Outputs
Hardware features
Battery capacity450 mAh
Built-in battery
Feature already supported
Emergency button
Feature already supported
Hardware extras
Emergency button
Feature already supported
Tracking features
Tracking modesContinuous
Location by Cell ID
Feature already supported
Events monitoring
Battery low
Feature already supported
Self monitoring
Internal battery level
Feature already supported
Remote management
Server connection setup over SMS
Feature already supported
Remote device configurationYes (over GPRS)
Feature already supported
Certification
CE
FCC

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

#config::{apn}::{apn_user}::{apn_pass};<6906>
#serverchange::217.23.132.215::46990;<6906>

The <APN> parameters depend on your GSM carrier.

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in

Login

[clean-login]

CLOSE
Register

[clean-login-register]

CLOSE
Loading...